P3D412 The P3 12" subwoofers are very popular, especially with people running multiple subwoofer configurations. Their dual voice coil design gives many different wiring options to ensure you get the most from your amplifier.

	Custom 10-AWG nickel plated push terminals
	Dual linear spider with embedded 16 AWG tinsel leads
	Extended pole piece and bumped backplate
	High excursion Poly-Ether-Ester surround
	High-temp voice coil with spun-laced Nomex® re-inforcement collar
	Kevlar Fiber reinforced semi-pressed paper cone and ABS/Acrylic dustcap
	Protective PVC textured magnet cover
	Reversable diamond cut cast aluminum trim ring
	Vented spider cavity

Size	12"
Impedance	4-Ohm x 2
Power Handling	500 Watts RMS  1000 Watts Max
Voice Coil Diameter	2.5" 4-Layer  (6.35 cm)
Motor Size	102 oz. double stacked
Speaker Connector	Dual 10 AWG compression
Fs (Hz)	28
Re (Ohms)	6.60
Le (mH)	5.8
Qms	6.80
Qes	0.56
Qts	0.52
Vas (Liters)	54.3
Sd (cm2)	500
SPL (1w/1m)	85 dB
Xmax (mm)	16.2
Woofer Displacement	0.094 cu. ft.  (2.66 Liters)
Cutout Diameter	11.25 in.  (28.58 cm)
Mounting Depth	6.75 in.  (17.15 cm)